Samsung had recently rolled out the latest Jelly Bean firmware update - Android 4.1.2 XXCMA2 - for Galaxy Note 10.1 N8000. The official firmware can now be downloaded manually either via Samsung KIES or using this guide. Users need not root their device or install a custom recovery tool for installing this firmware, as it is an official release.
Android 4.1.2 XXCMA2 Official Firmware Details
PDA: N8000XXCMA2
CSC: N8000OXXCMA1
Version: 4.1.2
Date: 2013-01-11
Regions Supported: Austria, Belgium, France, Germany, Hungary, Italy, Spain, United Kingdom
Key Points to Note
- Official XXCMA2 OTA firmware and the instructions given in this guide are applicable for the Galaxy Note 10.1 N8000 model only and will not work with any other device. Verify the device's model number by navigating to Settings > About Tablet.
- Verify that correct USB drivers are installed for the tablet on the computer. Download Samsung Galaxy Note N8000 USB drivers.
- Backup important data and settings on the tablet and ensure that the device has at least 85 percent battery charge.
- Make sure that USB Debugging mode is enabled by navigating to Settings > Developer Options or Settings > Applications > Development.
- Ensure that the device is factory unlocked and not locked to a specific carrier.
- Root access to the device will be lost soon after installing the official firmware. Users need to root the device again to regain full system access for installing third-party root-based apps, custom ROMs and system tweaks.
- The instructions provided in this guide are meant for reference purpose only and do not cover any warranty claims involving device damage or issues arising out of installing the official firmware. Users are advised to proceed at their own risk.
How to Update Galaxy Note 10.1 N8000 to Official Android 4.1.2 XXCMA2 Jelly Bean OTA Firmware
Step 1?-?Download Android 4.1.2 N8000XXCMA2?OTA firmware for Galaxy Note 10.1 to the computer and extract the?zip file.
Step 2 -?Download ODIN v1.85,?which is needed to?install Android 4.1.2?on Samsung Galaxy Note N8000.
Step 3 -?Power off the tablet and boot into Download?Mode. To do so, press and hold Volume Down and Power buttons together, until the Samsung logo or the construction Android robot icon with a triangle appears on screen.
Step 4 -?Launch ODIN on computer and connect Galaxy Note 10.1 to it while the tablet is still in?Download?Mode.
Step 5 -?When the tablet connects successfully, one of the ID:COM boxes turns yellow with the corresponding COM port?number. This step may take about 5 minutes to complete.
Step 6 -?Now, choose the files that need to be flashed or installed on the tablet, which can be found among the extracted files in?Step 1.
- Click the 'PDA' button and select the file named 'CODE'.
- Tap the 'Phone' button and choose the file named 'MODEM'. Ignore this step if there is no such file.
- Hit the 'CSC' button and choose the file named 'CSC'. Ignore this step if such file is missing.
- Click the 'PIT' button and select the .pit file. Ignore this step if it is absent.
Step 7 -?In ODIN, enable?Auto Reboot?and?F. Reset Time?options. But, the?Re-Partition?option should be checked ONLY if a .PIT file is chosen in the previous step.
Step 8 -?Now, hit the Start button in ODIN and the installation process will begin. It would take just a few minutes to complete.
Step 9 -?Once the firmware installation is completed, the tablet will reboot automatically. When the home?screen appears, just disconnect the tablet from computer.
Samsung Galaxy Note 10.1 N8000 is now successfully updated to Android 4.1.2 XXCMA2 official firmware. Go to Settings > About Tablet to verify the firmware version installed.
[Source: Team Android]
To report problems or to leave feedback about this article, e-mail:
To contact the editor, e-mail:
Cabin Fever 2 Alexis Wright Zumba binder full of women Microsoft Surface Candy Crowley binders of women Alexis Wright
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.